High performance but low price- users can own this reliable race-ready ESC at an affordable cost. Compact size, suitable for various car chassis. Auto identification system can recognize sensored or sensorless brushless motors automatically. Smooth operation and plentiful adjustment options. Suitable for most kinds of competitions.8 steps of timing adjustment greatly increase the output power of the motor and unlock its maximum potential. Proportional brake with 4 steps of Maximum Brake Force adjustment, 8 steps of Drag Brake Force adjustment and 4 steps of Initial Brake Force adjustment. 9 steps of acceleration (punch) adjustment, from "soft" to "very aggressive" to fit various of cars, tires and tracks.
Multiple protections: Low voltage cut-off protection for LiPo or NiMH battery / Over-heating protection / Throttle signal loss protection / Motor Lock-up protection. Easily reset all parameters to factory default settings. Compatible with optional device ---- the portable Digital LED Program Card, especially convenient for outdoor use. Sensored / Sensorless Brushless Motor. For 2S LiPo or 4-6 cell NiMH: =8.5T(1/10 On-road), =13.5T(1/10 Off-road) Note 1 For 3S LiPo or 8-9 cell NiMH: =13.5T(1/10 On-road), =17.5T(1/10 Off-road) Note 1.4-9 cell NiMH, 2-3S LiPo. 33mm(L)28mm(W)31.5mm(H, with cooling fan) 59g (with wires, without cooling Fan). "T" indicates the limit value of motor turns when the ESC timing is set to 0. The larger the timing, the more turns the motor needs. QUICRUN 3650 Sensored brushless motor G2.
High Efficiency means more POWER while keeping TEMP low! 1/10th, 1/12th On-road Race or drift Touring cars, F1, M vehicles and etc.
& Off-road (Buggies/2WD SCTs & Trucks) STOCK/SPORT Class Competitions (About Motors' T counts, please refer to rules regulated by race organizers), Beginners for practice, and Rock Crawlers (applicable to 21.5T, 25.5T motors). Built-in Hall sensor brings drivers an amazing sense of control. Top-quality components: heat-resistant magnet, heat-resistant wires and name-brand bearings. Dustproof design where motor leads exit.Features a gold-plated lockable connector which can be fastened by screws, eliminating the possibility of losing connections. Detachable structure is easy to clean and maintain, greatly prolonging the service life of the motor. Screw Spec a The M3 (diameter=3.0) screws are suitable for installation of the QUICRUN-3650-SENSORED motor. B Depth of screw holes: QUICRUN-3650-SENSORED. Motor Dimension (mm): Outer Diameter 36mm Length 52.8mm. Shaft dimension (mm): 3.17mm, Length of Projecting part 15mm. Current at the Point of M. P = Maximum Output Power. Note 2: The maximum output power is the test value obtained when the voltage is 7.4V, and the ESC timing is set to 0 degrees. This item is in the category "Toys & Hobbies\Radio Control & Control Line\RC Model Vehicle Parts & Accs\Body Parts & Interior\Cars, Trucks & Motorcycles". The seller is "speeddemon-rc" and is located in this country: US. This item can be shipped to United States, China, Mexico, Germany, Japan, Brazil.