Choose from Hobbywing Brushless Waterproof ESC Max8 G2, 4268 2250kv or 2500kv G2 Motor, or Combo. HWI38010405 Combo Max8 ESC + 4278/2250KV G2 Motor. (popular choice for Tekno MT410, Traxxas Sledge). HWI38010404 Combo Max8 ESC + 4278/2500KV G2 Motor. (popular choice for Tekno MT410).Efficient cooling system The frameless fan design is a patented technology. Rapid transmission of internal heat to the integrated housing radiator is made possible by high airflow from the side of the fan, and a copper thermal conduction sink on the internal power plate. These are built into high-reliability thermal systems to ensure that the ESC is always in good thermal condition. 1/8th Brushless System Turbo Technology The ESC is best paired with the EzRun 4278/4268SD G2 motor to achieve maximum performance. Turbo parameters are adjustable from up to 32 degrees, and the speed is significantly increased by up to 25%.
Capacitor Thermal Protection Capacitor thermal protection implemented by the ESC prevents irreversible damage to the ESC due to overload. Super Internal BEC The built-in switch mode BEC features a maximum output of 15A, and is voltage adjustable from 6V to 8.4V (step:0.1V). This allows the use of various standard and high voltage servos. Built-in Capacitor The ESC has three built-in 680uF capacitors, which increases the performance by 74% (870uF) compared to the MAX8 ESC.
The ultra-large capacitors built onto the ESC also ensure users do not need to install external capacitors on their vehicles. Real-time data & data logging function, Easy to get the power running status. After connecting the OTA module box, turn on the real-time data recording function to access the operating status. New sensored cable interface The Max8 G2 ESC is equipped with a new type of sensored cable interface. It is high recommended to use the motors from Hobbywing, as the waterproof protection level is at the highest level (IP67).
The ESC uses a special process, coupled with an innovative waterproof design, to increase waterproofing and dust-proofing performance in harsh conditions. Built-in ultra-powerful switch mode BEC with a continuous current of 6A, (15A max), and support for 6V/7.4V/8.4V output.Equipped with the most advanced and safe electronic switch. Supports up to 32-degree turbo timing. When used with the matching motor (such as EZRUN 4278SD), the maximum rpm can be increased by about 25%. Multiple protection functions: battery low voltage protection, ESC and motor overheat protection, signal loss protection, and current protection. Sensored and sensorless brushless motor. 3-4S Lipo 2500kv, 3-6S Lipo 2250kv. 6V / 7.4V / 8.4V adjustable, continuous current 10A (Switch-mode). H 60(L)x48(W)x40.5(H)mm.
EZRUN 4268SL Sensorless Motor 2600kv. This is the Hobbywing EZRUN 2600kV, 4268SL Sensorless Brushless Motor. This 4268SL pairs perfectly to the Hobbywing EZRUN Max8 ESC and is ideal for 1/8 scale applications, such as buggy, truggy, SCT and on-road. Features: 4 pole rotor for high torque, fast acceleration response and stable power output. Special technology for temperature control implemented by this motor guarantees less heat more efficiency (efficiency rate of up to 90%).
CNC machined aluminum housing, high purity copper windings, advanced rotor structure, high-quality alloy steel output shaft, high-precision bearings for high durability and smoothness. Rebuild-able design (partially rebuild-able) for routine maintenance effectively prolongs the motor life and raises the motor efficiency. This EZRUN motor is a perfect match for the HOBBYWING EZRUN MAX8 ESC. Specifications: Pole: 4 KV(No-load): 2600 R. (O): 0.0052 Current No-load(A): 4.2 Max.Output Power(W): 3000 C. At the point of M. P (A): 120 Motor D. &L(mm): F=42, L=68 Shaft D. &L of the projecting part(mm): F=5, L=18.5 LiPo(S): 2-4 Weight: 343g (12.098oz) Applicable: 1/8th Buggies/Touring Cars/SCTs Installation Tips How to Mount the Motor into a RC vehicle. M3/M4 mounting screws (4M3 & 4M4) are needed here, as the mounting holes are 8mm in depth, so we don't recommend using the M3/M4 screws with the length exceeds 10mm to mount the motor into your vehicle. Note: please choose the right mounting screws as per your chassis. Please choose the right mounting screws as per your chassis. How to Connect the Motor to an ESC. There is no polarity on the A/B/C three ESC-to-motor wires, so do not worry about how you connect them initially. You may find it necessary to swap two wires if the motor runs in reverse.
Recheck the Installation & Connections. Recheck the installation and all the connections before turning on the power. Hobbywing JST Port Convertor Cable. This is an optional part intended to convert the waterproof sensor cable used on the EZRUN MAX8 G2 and MAX4-HV ESC's. This allows the use of a standard sensored brushless motor.
Package includes one JST port converter cable. NOTE: This cable eliminates the waterproof and motor thermal protection features.