Castle Creations Sidewinder SW4 WP ESC & 3800Kv 5mm Shaft Brushless Motor Combo

  

Castle Creations Sidewinder SW4 WP ESC & 3800Kv 5mm Shaft Brushless Motor Combo. This combo is a great setup for 2S power in vehicles like the Traxxas Slash 2WD and 4x4, or up to 3S in the 2WD Rustler, Bandit and others. While the all new SIDEWINDER 4 builds upon Castle's most popular platform, the SIDEWINDER 1:10 SCALE SERIES, it is the first of its kind to run Castle's newest technology, CRYO-DRIVE. CRYO-DRIVE combines technology from cutting-edge hardware and software advancements to increase thermal performance.

COOLER TEMPS mean LONGER RUNS and MORE POWER in your SIDEWINDER 4 setup. 2s-3s LiPo; 6-8 cell NiMH use in vehicles up 6.5lbs with battery, ready-to-run. Sensorless brushless and/or brushed motor operation.

Waterproof design ESC and splash resistant 30MM fan. 5.0 volts fixed, 2 amps Peak BEC.

Audible alerts for error conditions. Convenient transmitter programming for six common adjustable settings. Telemetry Link compatible for Futaba S.

The SIDEWINDER 4 is a versatile ESC and is accepted in a wide variety of applications. Whether throwing dirt, ripping through a corner or steadily dominating the trails, we've got you covered! It is a cooling running torque animal for lighter 1/10th scale 2WD stadium trucks and buggies running up to a 3s LiPo.

Input Voltage Range: 2s-3s LiPo; 6-8 cell NiMH BEC Specifications: 5.0 volts fixed, 2 amps. Operating Environment: Waterproof design allows for use in nearly any environment Brake: Proportional Reversible: Yes, but may be disabled for racing. On/Off Switch: Yes Cooling Fan: 30mm fan included ESC Size: L: 2.08" (52.92mm) W: 1.50" (38.05mm) H: 1.28 (32.56mm) ESC Weight (w/wires): 2.26 oz.

(64 g) Connectors: 4mm female bullets for motor connection. Product Use Statements: Although Sidewinder 4 is waterproof, it is not intended for operation while completely submerged in liquid. They can corrode when exposed to corrosive materials, such as salt water.

Always rinse the ESC with clean water after exposure to corrosives or dirt. While the controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind. Application Guidelines: For short course trucks running on 2s LiPo and weighing up to 6.5 lbs; it can be run on a 3s LiPo with very conservative gearing. Recommended Vehicle Weight: No more than 6.5lbs with battery, ready-to-run. Tech Notes: Not all LiPos are created equal, and surge ratings should never be used to determine a pack's suitability for a brushless application.

Brushless setups frequently hit 100+ amps in peaks. Our experience suggests using only mild gear ratios with NiMH cells. Do not attempt to use NiMH cells in extreme setups.

Input Voltage Range: 2-3S LiPo Kv: 3800 Max. Recommended Vehicle Weight: 6.5lbs.

Tech Notes: Monitor motor temperatures closely; overheating a motor will cause permanent damage to the magnets. Never exceed 180 degrees F on the the motor or ESC. Water Resistant Design: Routine maintenance is recommended after running in wet conditions.

ESC/Battery Connector - Castle 4mm polarized connectors, Dean's Ultra Plug, or Traxxas Power Connector recommended. For many other items at the great prices we are known for!

Please do not use the order notes section to ask questions. Thank you for shopping at rcsuperstore!