Adhesives / Fluids / Tools. Buildings / Bridges / Tunnels. Grasses / Trees / Scenery. Trains / Tracks / Sets.
Accessories / Tape / Brushes. Paint - Aerosol / Spray Cans. Paint - Airbrush / Bottles. Brand New In Factory Packaging.
Sidewinder 8th is our sport 1:8 scale waterproof combo capable of 2-6S LiPo, with an 8 amp peak BEC. This is the perfect upgrade for 1:8 scale buggies, truggies and on-road vehicles as well as 1:10 scale monster trucks weighing up to 11 lbs. It can also work as a great upgrade for some 4WD short course trucks for 3s or 4s operation.
It also comes standard with a highly efficient ESC cooling fan. Features: 2s - 6s LiPo (25.2V) use in vehicles up 11. Technical Specs Controller: Input Voltage Range.
MIN: 2S LiPo MAX: 6S LiPo (25.2V) BEC Specifications. 5.5V fixed; 8A peak Operating Environment. Waterproof design allows for use in nearly any environment.
Yes, but may be disabled for racing. Yes, factory equipped (30mm), fully removable (see Product Use Statements below) Size.
L: 2.45" (62.2mm) W: 2.20" (56mm) H: 1.33 (34mm) Weight (with wires). 6.5mm female bullets for motor connection. Battery Connector required, 6.5mm Castle Connectors are recommended. Although Sidewinder 8 and Castle brushless motors are waterproof, they are not intended for operation while completely submerged in liquid. They can corrode when exposed to corrosive materials, such as salt water. Always rinse the ESC and motor with clean water after exposure to corrosives or dirt. While the motor and controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind.The cooling fan must be removed prior to driving in wet conditions. Intended for up to 6S (25.2 Volt) operation in vehicles weighing less than 1 lbs, with batteries, ready-to-run. Combo includes Castle sensored 1515 2200Kv: Max Cells: 6s Lipo or 16 NiMH Max. Less than 11 lbs, with batteries, ready-to-run Programmability.
Motor Specs Input Voltage Range. Length: 75.4mm Diameter: 40mm (41.4mm with fins) Weight (w/wires). 429g / 15.1oz Shaft Size. Length: 20mm Diameter: 5mm Mounting Hole Specifications. 6.5mm male Castle Bullet Connectors, includes 210mm length sensor wire.
Ideal for 1:8 scale buggies, truggies, on-road vehicles and 1:10 scale monster trucks up to 15lbs. See application guidelines Tech Notes.
Running modes: SMARTSENSET, Sensored, Sensorless with Castle sensored capable ESCs. Water Resistant Design: The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities. Castle recommended applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions. Please refer to this document for running and maintaining motors in wet environments. We are an authorized dealer of every product we offer in our store.There are always ways to work things out to meet your satisfaction. Top 10 Reasons to Shop At GoNitroHobbies. We are authorized dealers of all the items we sell and all products are brand new in factory packaging. We have been serving R/C hobby enthusiasts worldwide for over 9 years.
We aim to offer all of our customers with the best service to ensure their satisfaction is met. With thousands of satisfied customers around the world, check out our feedback and you'll see why customers prefer to shop with us. We offer a wide selection of products and carry a ton of brands to ensure our customers find what they're looking for. We insure that all orders are packed properly and delivered to your doorstop safely.