Castle Creations Mamba Monster X 8S 1/6 Brushless Waterproof ESC, 800KV Motor

  
Castle Creations Mamba Monster X 8S 1/6 Brushless ESC 10-0165-00. The Castle Creations Mamba Monster X 8S 1/6 Brushless ESC features CRYO-DRIVET - Castle's latest break-through technology. CRYO-DRIVE minimizes the amount of time the ESC's electrical components spend generating heat.

This proprietary software advancement works in parallel with a unique open housing design and a forged elliptical fin heatsink to allow increased directional airflow to cool critical components. Combine this with a high speed 40mm fan and you have a design that maximizes airflow through the system, taking thermal performance to the next level. Mamba Monster X 8S is designed for 1/6 scale vehicles weighing up to 25 lbs.

With up to 8S LiPo. Compatible models include the TraxxasT X-Maxx & Unlimited Desert Racer; ArrmaT Kraton 8s & Limitless; LosiT Super Rock Rey & Audi R8; RedcatT Shredder. Input voltage range 2S-8S LiPo. Sensored, Sensorless and SmartSenseT running modes. Powerful Integrated 8A Peak Adjustable BEC (5.25V-8.0V).

Premium forged heatsink with elliptical fins for superior airflow and increased heat dissipation. Oversized factory equipped thermally controlled 40mm fan? Waterproof design for all weather conditions.

ESC is housed in a rugged CNC aluminum case and potted in waterproof epoxy to protect the components and promote efficient heat transfer. Data-logging capability to capture and record performance data from your vehicle. Auxiliary wire functionality for "on the-fly" adjustments using your transmitter. Audible alerts for easy diagnosis of possible issues such as motor over-temperature and low voltage cutoff. Convenient transmitter programming for six adjustable settings such as cutoff voltage and drag brake.

Easily tune and update ESC with USB and BluetoothT programming options. Recommended battery capacity for 1:6 scale vehicles is 5000mah.

Castle recommends using 50C continuous discharge or higher LiPo batteries. Surge ratings should never be used to determine a pack's suitability for a brushless application. Castle recommends a high current connector designed for high-powered electric systems, rated for 100+ amps, such as Castle CC Bullet 6.5mm, CC Bullet 8.0mm, or 6.5mm Polarized Castle Connectors. Applying voltages higher than 33.6V will cause irreparable damage to ESC. Although Mamba Monster X 8S is waterproof, it is not intended for operation while completely submerged in liquid. Always rinse the ESC with clean water after exposure to corrosives or dirt. The cooling fan must be removed prior to driving in wet conditions.

Application guidelines: 1:6 scale RC hobby vehicles weighing up to 25 lbs. Running Modes: Sensored, Sensorless and SmartSenseT (when paired with a Castle 4-POLE 12SLOT sensored motor).

Input Voltage Range: MIN: 2S LiPo, MAX: 8S LiPo 33.6V. BEC Specifications: Adjustable: 5.5V, 6.0V, 7.5V. Or 8.0V (8A Peak), default 5.5V. Operating environment: Waterproof design enables use in nearly any environment. Reversible: Yes, but may be disabled for racing.

On /off switch: Yes, waterproof. Cooling fan: Yes, factory equipped (40mm), fully removable (See Product Use Statements for more info). Size: L x W x H 69.5mm x 54.1mm x 47mm.

Weight (w/wires): 5.75 oz. Connector type: 6.5mm female bullets for motor connection.

Telemetry Link Capable: Yes, with Castle Creations Telemetry Link for S. BUS2 and Futaba T4PX and T7PX transmitters. You might be familiar with the brute 1:5 scale version of the 2028-800Kv (8AWG wire and 8mm bullets) that has overpowered large scale RC for years. The Castle 2028 Extreme 800KV motor now has an IMPROVED 4-POLE 12-SLOT design that boasts exceptional EFFICIENCY and produces LESS HEAT. If you need LARGE-SCALE POWER for LARGE-SCALE VEHICLES the new BRUSHLESS SENSORED 2028-800KV motor will no doubt hold up to the heavy throttle and extended usage that 1:6th scale vehicles encounter.

Running modes include Sensored and an ULTRA-EFFICIENT sensorless mode. High-strength, high-temperature grade neodymium sintered magnets combined with High-strength Kevlar wrap ensures the integrity of the rotor is not compromised during harsh running conditions.

Oversized NMB bearings and vibration dampening system ensure the longest bearing life possible. Our proprietary winding techniques allow us to produce a stator assembly that is the lowest possible resistance, resulting in a cooler running motor.

Dual sensor ports to ensure optimal installation in your large-scale vehicle. Updated modern and sleek design; looks as cool as it performs.

Technical Specs Input Voltage Range: 8S MAX (with 10 AWG and 6.5mm Bullets) Kv: 800 Max. RPM: 45,000 Size: Length: 4.4" (112.7mm) Diameter: 2.2" (56.3mm) Weight (w/wires): 44 oz. Connectors: 6.5mm male connectors, 250mm sensor wire and 10AWG wires Items Needed for Operation: Compatible Electronic Speed Control (ESC) see Recommended ESC(s) below Product Use Statements: Monitor motor temperatures closely; overheating a motor will cause permanent damage to the magnets. Never exceed 180° F on the the motor or ESC. Do not use mounting screws that extend more than 5mm into the front of the motor.

Application Guidelines: Perfect upgrade for any 1:6 scale vehicles weighing up to 25 lbs and up to 8s LiPo. Recommended ESC(s): Mamba Monster X 8S Max. Recommended Vehicle Weight: 25 lbs Tech Notes: Running modes: Sensorless and Sensored The 2028-800KV is a water resistant design. The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities.

We recommend applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions. Please refer to this document for running and maintaining motors in wet environments.

B-Link Bluetooth Interface Adapter, for Apple iOS ESC tuning is an essential component for customizing vehicle performance. Users enjoy the ability to adjust many variables to enhance their experience including throttle, braking curve, drag brake, reverse type and more. The Castle B-LINK Bluetooth Adapter enables users to wirelessly program settings on current Castle Creations ESCs, many older models and the BEC 2.0/BEC Pro on Apple iOS devices.

The free Castle Link app for iOS is available on the Apple App Store for use with iPhones and iPads, and once downloaded, it does not require a data connection and can be used anywhere, including remote areas. Features: Compact and Lightweight Convenient Waterproof Design For Apple iOS Free Castle Link App Download Specifications: Dimensions: 1.20 x. 25 (30.48mm x 20.55mm x 6.55mm) Weight: 0.23oz (6.62g).